Ghost 2 Immobiliser Problems
Designed to protect vehicles from hacking and key cloning, The Ghost 2 immobiliser is a discrete device that can be installed without damaging your car. It prevents your vehicle from starting until you press a specific sequence of buttons inside your vehicle, similar to the password you enter on a mobile phone.
Stop/Start
Ghost immobilisers prevent vehicles from being stolen by preventing the engine from starting until it receives the right PIN code. This is accomplished without altering the vehicle, and is not detected by thieves. The unit communicates with the ECU via the CAN data bus, which allows it to lock the vehicle. This system is similar to the one car manufacturers have been using in their cars for years, however, the thief isn't able to add a key or use key relay technology to bypass it as they could with factory-installed systems.
Ghost is compatible with any vehicle that has an engine, which includes motorhomes, cars, vans, caravans, and bikes. The same system can also be utilized on electric vehicles. It is an excellent alternative to wheel clamps and steering wheel locks.
When the Ghost is activated, it will stop all buttons in your car and stop the ignition from being started without the PIN code. You can enter the code manually or through the Android or Apple app. If the wrong code is entered, the app will display an indicator light. The Ghost will then refuse to let the vehicle to be restarted. This is a great deterrent. when the vehicle isn't started the thief will continue to pursue a new victim.
The Ghost is small weatherproof device that can be hidden in the most difficult-to-access areas of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also very easy to remove should you choose to change your vehicle or hand it in to valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by certain insurance companies. It also features a secure emergency Pin Code Override, and the Service/Valet feature that can be activated by pressing a button within the app or using your key fob.
Disarm
Unlike the mechanical anti-theft devices, which are able to be removed and reinstalled, ghost immobilisers are concealed and integrated into the car. Even if they were found, thieves would not be able start the car. They are virtually impossible to hack or bypass. Ghost immobilisers are capable of preventing key cloning and devices spoofing signals and signal jamming. These are techniques thieves use to gain access into cars that have standard immobilisers.
An immobiliser works by sending a code to the ECU (electronic control unit). If a incorrect code is received the vehicle will not be started as the engine won't start up. Although it is possible to disable the ghost immobiliser with software, this would be very lengthy and complicated. Only an authorized installer is able to install and use the software.
The Ghost immobiliser is a tiny device that is part of the wiring loom of the vehicle and is invisible to the naked eye after it has been installed. It does not appear on diagnostic systems. There are no indicators with LEDs, and it does not communicate with the engine via the OBD port. It communicates in a silent manner through the CAN data circuit.
The system will stop the vehicle from starting until it is able to receive a user-defined PIN code sequence. This code is entered using buttons on the steering wheel and door panels as well as the central console. This is a more secure way to safeguard your car since it doesn't require the use of a key fob or remote control.
In addition to this Ghost also has a service mode which can be activated through the application on your mobile phone. This allows you to give your keys to someone else to use for service or valet parking, without needing to enter the disarm sequence.
You should not remove the system from your Ghost yourself, regardless of whether it's in service mode. This can damage the engine. It is recommended that you contact an TASSA certified installer who will be able to remove the system safely and properly. Our newest GHOST immobilisers come with a unique fingerprint QR sticker, which is hidden in various areas of your vehicle. These are linked to our security register. In the event that the system is removed and then is sold on the blackmarket it will be able to trace the original owner.
Anti-Hijack
Ghost Immobiliser 2 has a very useful anti-hijack feature. This system is a smart key that shields your vehicle from thieves. When the ignition switch is turned to on and the vehicle remains stationary for a period of 30 seconds then the Ghost system will automatically stall the engine and turn on the hazard lights on. This allows the driver and passengers time to press the secure button before the system is reactivated.
Contrary to many other systems that simply stop the engine whenever the ignition switch is turned on and on, the Ghost system has a unique controller and timer unit that will shut off the fuel cut-off valve 14 in the event that it is activated within an agreed-upon time even when the ignition is turned on! The delay time interval needs to be long enough to allow the hijacked owner of the vehicle to drive away from the location of the robbery and sufficient distance from the vehicle that is stalled before the system can be activated.
The Ghost comes with added security that prevents common hacking techniques used to gain access to modern vehicles like relay attacks and key range extending. This is due to the fact that the Ghost system communicates in a quiet manner and doesn't emit any signals that could be picked up by thieves using codes or RF scanning technology.
The Ghost system also features the Service/Valet mode that allows your vehicle to be temporarily started and driven without the need for a PIN code. This is great if you are parking your car and need to be away for a short period of time, for example to put groceries in the boot, or open a garage door etc. The system will exit service mode depending on the speed and time or through the simple PIN code entry process and give you security knowing that only YOU are able to utilize your vehicle!
Keyless Entry
With the increasing trend of theft of cars using contactless technology Many customers are seeking out additional security options. This is especially applicable to those who have put time or money in personalizing their vehicles and own expensive or rare vehicles. A supplementary immobiliser is an affordable method to stop this kind of theft since it can stop your vehicle from starting until the correct pin code is entered on your key fob.
ghost immobiliser installers near me are designed to impede a variety of vehicle circuits which include ones that control the starter motor and the fuel pump. They also can shut the car alarm to draw attention and deter any potential thieves.
These devices are directly connected to the engine control unit through the CAN data network. They stop the thief from gaining access to it by installing a new ECU or using key programmers. These immobilisers can be fitted discreetly in your vehicle, leaving no marks and are undetectable by the tools that hi-tech thieves use.
The Ghost immobiliser is different from other systems that require the driver to carry tags or an app. Instead, you are able to select your own pin sequence by pressing an image on your door, steering panel, or centre console. The pin can be changed as frequently as you'd like, meaning it is as secure as a credit card and is even more difficult to crack due to it requiring up to 20 presses.
Ghost also comes with a Valet/Service mode, which permits you to deactivate it if you intend to give your vehicle to valet parking, or for service. This allows the system to function within certain parameters like a 30-mph speed limit. It is then reactivated with the original key or the corresponding entry code.
This makes it the most effective and secure aftermarket CAN immobiliser available on the market, and is insurance approved by Thatcham as an optional accessory to your vehicle when installed by one of our authorised installers. The Ghost 2 immobiliser is also equipped with six QR fingerprint labels as well as an ISR contact card that contains your unique QR code and an emergency code that is secure which can be kept in the purse or wallet of your car.